Tag Archives: machine shop

Economic Model Two Color Four Color Six Color Fle manufacturer xo shop /Flexographic Printing Machine with Manual Registration

Product Description

Function Units

  1.  Unwinding Unit
  1. Unwinding method of single-unit air-expanding shaft for base paper feeding rack
  2. Loading method of convex key type air expanding shaft
  3. Rewinding uses magnetic powder brake and automatic tension control to achieve constant tension control.
  4. Early warning of material change (automatic warning of too small unwinding diameter)
  5. Paper breaking shutdown device
  6. Equipped with a rapid inflatable gun
  7. Deviation correction system: can automatically correct the position of paper; Detection method: edge checking
  8. Paper bonding platform, easy to operate
  9. Hydraulic loading and unloading device

2. Web Xihu (West CZPT ) Dis. System

  1. Paper Splicing Table : with pneumatic paper holding device.
  2. Ball screw electric actuator
  3. Adopt the photoelectric sensor for web guide transmission
  4. Electronic web guide traction device. If there is any excursion in paper feeding,the system will have a constant and accurate adjustment
  5. Adopt closed loop control system to accurately detect the deviation and correct it
  6. Hard Anodization to the paper guide HV 800-1000
  7. Inspection:the edge
  8. Web Xihu (West CZPT ) Dis. precision:±0.02mm

3. In-feed Tension Control Unit

  1. Use the double side pressure rubber roller to clutch and feed paper and to ensure the tension

 

  1. Printing Units(shaft system)
  1. The machine double sides frame is made of overall alloy and cast iron, which improves the stable performance and durability of the press machine
  1. High precision ceramic anilox roll with micro-metric adjustment
  1. Reversed single doctor blade
  1. Anilox roll and printing cylinder separation and reunion pneumatically
  2. self-cleaning plate feature.The anilox and plate cylinders release alternately, transfering residual ink to the paper when machine stop, leaving the printing plates clean and minimizing the need of hand to clean the plates
  3. When press stops, the anilox roll continuous running. Hence avoiding permanent damage, which is caused by ink drying on the anilox surface

5. Drying Units

  1. Every printing unit has one separate drying unit
  1. High efficiency drying unit including infra red lamps, air blowing/suction system. Air intake adjustable, Air circulation design on the exhaust, the blower is adjustable
  2. Short wave infrared heating elements
  3. Natural air blowing assembly with exhaust fan

6. Video Web Inspection System

  1. Video is high efficiency and synchronous, can be moved left and right
  2. With 14 inch monitor one pc
  3. one stroboscope lamp
  4. It can be enlarged 18 times of image

7.Out Feed Tension Control System

  1. The rear tension unit is made of alloy and cast iron
  2. Use the double side pressure rubber to clutch and feed and to guarantee the stale tension

8.Rewinding Unit

  1. rewind unit 60”(1524mm)capacity, with 3” shaft
  1. Hydraulic roll lift
  2. Web break sensor, automatically shut down when paper broken.

9. CZPT matic Lubricating System

  1. The gear’s automatic dampening system can adjust the lubricating time and ration
  2. When the dampening system breaks down or the lubrication is not enough, the indicator will alarm automatically.

Technical Parameters:

Specification 650 920 1571 1220 1320
Max. Web Width 650mm 920mm 1571mm 1220mm 1320mm
Max. CZPT Width 600mm 900mm 1000mm 1200mm 1300mm
Max Die-Cutting Width 600mm 900mm 1000mm 1200mm 1300mm
Printing Repeat 286-1200mm 286-1200mm 286-1200mm 286-1200mm 286-1200mm
Max.Unwinder Diameter 1524mm 1524mm 1524mm 1524mm  
Max.Rewinder Diameter 1524mm 1524mm 1524mm 1524mm 1524mm
Gearing 1/8cp 1/8cp 1/8cp 1/8cp 1/8cp
Max CZPT CZPT 150m/min 150m/min 150m/min 150m/min 150m/min
Diameter of web roller 100mm 100mm 100mm 100mm 100mm
Drying mode Warm Drying/IR Drying/ UV Drying
Oil used Aqueous ink/ UV Ink
Power Requirement 380V 3PH 50Hz
Substrate 17g copy paper, cotton paper, 80-450g chrome paper, aluminum-foil paper, BOPP, PET, paper board, kraft paper

 

Bk 3015 1.5m*3m CNC Sheet Met shop al Plasma Cutter near me shop Machine Sale Online

Product Description

BK 3015 1.5m*3m CNC Sheet CZPT Plasma Cutter CZPT sale online

1 Main features

  1. The machine is desktop gantry structure with double-side drive. X & Y axes track are precise cylindrical linear guide rails, precise gear and rack drive, runs stably.
  2. Machine frame adopts the whole welding and annealing treatment, main frame is made by medium-sized steel pipe through welding; rail base plates are made through the planer precision processing, high strength, good precision and no deformation.
  3. Crossbeam, side panels and all movable parts are made by aluminum alloy through fine casing and milling, with features of high strength and small inertia, ensuring the high strength and avoiding the cutting positioning instability caused by high inertia.
  4. Adopting HP105 portable arc-pressure height regulator which can automatically regulates the height between cutter and plate to ensure the cutting quality. CZPT structure can effectively avoid collision between cutting head and steel plates owning to reaction rate cannot matches with that of cutting head.
  5. Specimen closed environmental bottom groove and dust treatment system timely discharge dust and provides a healthy working environment for workers.

2. Control system

1. Up to 45 commonly used graphics libraries

2. Graphics scaling, rotation, mirroring functions

3. Graphics matrix, interleaved, and repetitive

4. CZPT matically limit the speed in the corner according to the thickness of the steel plate, effectively prevent over-burning

5. Quickly convert between metric and imperial measurements .

6. Graphical steel plate calibration

7. Coordinate system is customizable

8. CZPT izable IO

9. Backup system and parameters, online upgrade

3. CZPT er visits

4. Company views 

5. Delivery 

6. More Products

Pre-service:
1:We will help you confirm the model of CZPT machine according to your offered sheet plate information.
2:You are very welcome to see CZPT machine how to work in the factory before you place an order with us.
Aftersales-service:
1:Free installation,trial start and adjustment,training.
2:We guarantee machine quality for 2 years.During this year,if spare parts of the machine were damaged,we can send the components to the CZPT er by DHL,TNT freely.
3:Our factory provide the secive for the CZPT er forever,if the CZPT er need operation help,we provide 24 hours on-line reply service.

Beke 1 near me shop 00A 10mm CNC Cheap Sheet Metal Plasma Cutting Machine

Product Description

Beke 100A 10mm CNC sheet metal Plasma Cutting CZPT


1 Main features

  1. The machine is desktop gantry structure with double-side drive. X & Y axes track are precise cylindrical linear guide rails, precise gear and rack drive, runs stably.
  2. Machine frame adopts the whole welding and annealing treatment, main frame is made by medium-sized steel pipe through welding; rail base plates are made through the planer precision processing, high strength, good precision and no deformation.
  3. Crossbeam, side panels and all movable parts are made by aluminum alloy through fine casing and milling, with features of high strength and small inertia, ensuring the high strength and avoiding the cutting positioning instability caused by high inertia.
  4. Adopting HP105 portable arc-pressure height regulator which can automatically regulates the height between cutter and plate to ensure the cutting quality. CZPT structure can effectively avoid collision between cutting head and steel plates owning to reaction rate cannot matches with that of cutting head.
  5. Specimen closed environmental bottom groove and dust treatment system timely discharge dust and provides a healthy working environment for workers.

2. Control system

1. Up to 45 commonly used graphics libraries

2. Graphics scaling, rotation, mirroring functions

3. Graphics matrix, interleaved, and repetitive

4. CZPT matically limit the speed in the corner according to the thickness of the steel plate, effectively prevent over-burning

5. Quickly convert between metric and imperial measurements .

6. Graphical steel plate calibration

7. Coordinate system is customizable

8. CZPT izable IO

9. Backup system and parameters, online upgrade

3. CZPT er visits

4. Company views 

5. Delivery 

6. More Products

Pre-service:
1:We will help you confirm the model of CZPT machine according to your offered sheet plate information.
2:You are very welcome to see CZPT machine how to work in the factory before you place an order with us.
Aftersales-service:
1:Free installation,trial start and adjustment,training.
2:We guarantee machine quality for 2 years.During this year,if spare parts of the machine were damaged,we can send the components to the CZPT er by DHL,TNT freely.
3:Our factory provide the secive for the CZPT er forever,if the CZPT er need operation help,we provide 24 hours on-line reply service.

Economic Cheap Price 4 Colour Co wholesaler ated Paper Flexography Pri near me shop nting Machine

Product Description

Function Units

  1.  Unwinding Unit
  1. Unwinding method of single-unit air-expanding shaft for base paper feeding rack
  2. Loading method of convex key type air expanding shaft
  3. Rewinding uses magnetic powder brake and automatic tension control to achieve constant tension control.
  4. Early warning of material change (automatic warning of too small unwinding diameter)
  5. Paper breaking shutdown device
  6. Equipped with a rapid inflatable gun
  7. Deviation correction system: can automatically correct the position of paper; Detection method: edge checking
  8. Paper bonding platform, easy to operate
  9. Hydraulic loading and unloading device

2. Web Xihu (West CZPT ) Dis. System

  1. Paper Splicing Table : with pneumatic paper holding device.
  2. Ball screw electric actuator
  3. Adopt the photoelectric sensor for web guide transmission
  4. Electronic web guide traction device. If there is any excursion in paper feeding,the system will have a constant and accurate adjustment
  5. Adopt closed loop control system to accurately detect the deviation and correct it
  6. Hard Anodization to the paper guide HV 800-1000
  7. Inspection:the edge
  8. Web Xihu (West CZPT ) Dis. precision:±0.02mm

3. In-feed Tension Control Unit

  1. Use the double side pressure rubber roller to clutch and feed paper and to ensure the tension

 

  1. Printing Units(shaft system)
  1. The machine double sides frame is made of overall alloy and cast iron, which improves the stable performance and durability of the press machine
  1. High precision ceramic anilox roll with micro-metric adjustment
  1. Reversed single doctor blade
  1. Anilox roll and printing cylinder separation and reunion pneumatically
  2. self-cleaning plate feature.The anilox and plate cylinders release alternately, transfering residual ink to the paper when machine stop, leaving the printing plates clean and minimizing the need of hand to clean the plates
  3. When press stops, the anilox roll continuous running. Hence avoiding permanent damage, which is caused by ink drying on the anilox surface

5. Drying Units

  1. Every printing unit has one separate drying unit
  1. High efficiency drying unit including infra red lamps, air blowing/suction system. Air intake adjustable, Air circulation design on the exhaust, the blower is adjustable
  2. Short wave infrared heating elements
  3. Natural air blowing assembly with exhaust fan

6. Video Web Inspection System

  1. Video is high efficiency and synchronous, can be moved left and right
  2. With 14 inch monitor one pc
  3. one stroboscope lamp
  4. It can be enlarged 18 times of image

7.Out Feed Tension Control System

  1. The rear tension unit is made of alloy and cast iron
  2. Use the double side pressure rubber to clutch and feed and to guarantee the stale tension

8.Rewinding Unit

  1. rewind unit 60”(1524mm)capacity, with 3” shaft
  1. Hydraulic roll lift
  2. Web break sensor, automatically shut down when paper broken.

9. CZPT matic Lubricating System

  1. The gear’s automatic dampening system can adjust the lubricating time and ration
  2. When the dampening system breaks down or the lubrication is not enough, the indicator will alarm automatically.

Technical Parameters:

Specification 650 920 1571 1220 1320
Max. Web Width 650mm 920mm 1571mm 1220mm 1320mm
Max. CZPT Width 600mm 900mm 1000mm 1200mm 1300mm
Max Die-Cutting Width 600mm 900mm 1000mm 1200mm 1300mm
Printing Repeat 286-1200mm 286-1200mm 286-1200mm 286-1200mm 286-1200mm
Max.Unwinder Diameter 1524mm 1524mm 1524mm 1524mm  
Max.Rewinder Diameter 1524mm 1524mm 1524mm 1524mm 1524mm
Gearing 1/8cp 1/8cp 1/8cp 1/8cp 1/8cp
Max CZPT CZPT 150m/min 150m/min 150m/min 150m/min 150m/min
Diameter of web roller 100mm 100mm 100mm 100mm 100mm
Drying mode Warm Drying/IR Drying/ UV Drying
Oil used Aqueous ink/ UV Ink
Power Requirement 380V 3PH 50Hz
Substrate 17g copy paper, cotton paper, 80-450g chrome paper, aluminum-foil paper, BOPP, PET, paper board, kraft paper

 

Horizontal Type near me shop 6 Color Flexography Printing Machine for Paper Material Custom s

Product Description

Function Units

  1.  Unwinding Unit
  1. Unwinding method of single-unit air-expanding shaft for base paper feeding rack
  2. Loading method of convex key type air expanding shaft
  3. Rewinding uses magnetic powder brake and automatic tension control to achieve constant tension control.
  4. Early warning of material change (automatic warning of too small unwinding diameter)
  5. Paper breaking shutdown device
  6. Equipped with a rapid inflatable gun
  7. Deviation correction system: can automatically correct the position of paper; Detection method: edge checking
  8. Paper bonding platform, easy to operate
  9. Hydraulic loading and unloading device

2. Web Xihu (West CZPT ) Dis. System

  1. Paper Splicing Table : with pneumatic paper holding device.
  2. Ball screw electric actuator
  3. Adopt the photoelectric sensor for web guide transmission
  4. Electronic web guide traction device. If there is any excursion in paper feeding,the system will have a constant and accurate adjustment
  5. Adopt closed loop control system to accurately detect the deviation and correct it
  6. Hard Anodization to the paper guide HV 800-1000
  7. Inspection:the edge
  8. Web Xihu (West CZPT ) Dis. precision:±0.02mm

3. In-feed Tension Control Unit

  1. Use the double side pressure rubber roller to clutch and feed paper and to ensure the tension

 

  1. Printing Units(shaft system)
  1. The machine double sides frame is made of overall alloy and cast iron, which improves the stable performance and durability of the press machine
  1. High precision ceramic anilox roll with micro-metric adjustment
  1. Reversed single doctor blade
  1. Anilox roll and printing cylinder separation and reunion pneumatically
  2. self-cleaning plate feature.The anilox and plate cylinders release alternately, transfering residual ink to the paper when machine stop, leaving the printing plates clean and minimizing the need of hand to clean the plates
  3. When press stops, the anilox roll continuous running. Hence avoiding permanent damage, which is caused by ink drying on the anilox surface

5. Drying Units

  1. Every printing unit has one separate drying unit
  1. High efficiency drying unit including infra red lamps, air blowing/suction system. Air intake adjustable, Air circulation design on the exhaust, the blower is adjustable
  2. Short wave infrared heating elements
  3. Natural air blowing assembly with exhaust fan

6. Video Web Inspection System

  1. Video is high efficiency and synchronous, can be moved left and right
  2. With 14 inch monitor one pc
  3. one stroboscope lamp
  4. It can be enlarged 18 times of image

7.Out Feed Tension Control System

  1. The rear tension unit is made of alloy and cast iron
  2. Use the double side pressure rubber to clutch and feed and to guarantee the stale tension

8.Rewinding Unit

  1. rewind unit 60”(1524mm)capacity, with 3” shaft
  1. Hydraulic roll lift
  2. Web break sensor, automatically shut down when paper broken.

9. CZPT matic Lubricating System

  1. The gear’s automatic dampening system can adjust the lubricating time and ration
  2. When the dampening system breaks down or the lubrication is not enough, the indicator will alarm automatically.

Technical Parameters:

Specification 650 920 1571 1220 1320
Max. Web Width 650mm 920mm 1571mm 1220mm 1320mm
Max. CZPT Width 600mm 900mm 1000mm 1200mm 1300mm
Max Die-Cutting Width 600mm 900mm 1000mm 1200mm 1300mm
Printing Repeat 286-1200mm 286-1200mm 286-1200mm 286-1200mm 286-1200mm
Max.Unwinder Diameter 1524mm 1524mm 1524mm 1524mm  
Max.Rewinder Diameter 1524mm 1524mm 1524mm 1524mm 1524mm
Gearing 1/8cp 1/8cp 1/8cp 1/8cp 1/8cp
Max CZPT CZPT 150m/min 150m/min 150m/min 150m/min 150m/min
Diameter of web roller 100mm 100mm 100mm 100mm 100mm
Drying mode Warm Drying/IR Drying/ UV Drying
Oil used Aqueous ink/ UV Ink
Power Requirement 380V 3PH 50Hz
Substrate 17g copy paper, cotton paper, 80-450g chrome paper, aluminum-foil paper, BOPP, PET, paper board, kraft paper

 

Nanjing Beke New Style 60A High Precision Aluminu near me shop sales m Sheet Plasma Cutting Machine Factroy Price

Product Description

Beke CNC sheet metal Plasma Cutting CZPT

1 Main features

  1. The machine is desktop gantry structure with double-side drive. X & Y axes track are precise cylindrical linear guide rails, precise gear and rack drive, runs stably.
  2. Machine frame adopts the whole welding and annealing treatment, main frame is made by medium-sized steel pipe through welding; rail base plates are made through the planer precision processing, high strength, good precision and no deformation.
  3. Crossbeam, side panels and all movable parts are made by aluminum alloy through fine casing and milling, with features of high strength and small inertia, ensuring the high strength and avoiding the cutting positioning instability caused by high inertia.
  4. Adopting HP105 portable arc-pressure height regulator which can automatically regulates the height between cutter and plate to ensure the cutting quality. CZPT structure can effectively avoid collision between cutting head and steel plates owning to reaction rate cannot matches with that of cutting head.
  5. Specimen closed environmental bottom groove and dust treatment system timely discharge dust and provides a healthy working environment for workers.

2. Control system

1. Up to 45 commonly used graphics libraries

2. Graphics scaling, rotation, mirroring functions

3. Graphics matrix, interleaved, and repetitive

4. CZPT matically limit the speed in the corner according to the thickness of the steel plate, effectively prevent over-burning

5. Quickly convert between metric and imperial measurements .

6. Graphical steel plate calibration

7. Coordinate system is customizable

8. CZPT izable IO

9. Backup system and parameters, online upgrade

3. CZPT er visits

4. Company views 

5. Delivery 

6. More Products

Pre-service:
1:We will help you confirm the model of CZPT machine according to your offered sheet plate information.
2:You are very welcome to see CZPT machine how to work in the factory before you place an order with us.
Aftersales-service:
1:Free installation,trial start and adjustment,training.
2:We guarantee machine quality for 2 years.During this year,if spare parts of the machine were damaged,we can send the components to the CZPT er by DHL,TNT freely.
3:Our factory provide the secive for the CZPT er forever,if the CZPT er need operation help,we provide 24 hours on-line reply service.

Flexogr near me shop aphy Printing Paper Cup and Paper Bag Machine (Fengmi Cost ng) 2 Color

Product Description

Function Units

  1.  Unwinding Unit
  1. Unwinding method of single-unit air-expanding shaft for base paper feeding rack
  2. Loading method of convex key type air expanding shaft
  3. Rewinding uses magnetic powder brake and automatic tension control to achieve constant tension control.
  4. Early warning of material change (automatic warning of too small unwinding diameter)
  5. Paper breaking shutdown device
  6. Equipped with a rapid inflatable gun
  7. Deviation correction system: can automatically correct the position of paper; Detection method: edge checking
  8. Paper bonding platform, easy to operate
  9. Hydraulic loading and unloading device

2. Web Xihu (West CZPT ) Dis. System

  1. Paper Splicing Table : with pneumatic paper holding device.
  2. Ball screw electric actuator
  3. Adopt the photoelectric sensor for web guide transmission
  4. Electronic web guide traction device. If there is any excursion in paper feeding,the system will have a constant and accurate adjustment
  5. Adopt closed loop control system to accurately detect the deviation and correct it
  6. Hard Anodization to the paper guide HV 800-1000
  7. Inspection:the edge
  8. Web Xihu (West CZPT ) Dis. precision:±0.02mm

3. In-feed Tension Control Unit

  1. Use the double side pressure rubber roller to clutch and feed paper and to ensure the tension

 

  1. Printing Units(shaft system)
  1. The machine double sides frame is made of overall alloy and cast iron, which improves the stable performance and durability of the press machine
  1. High precision ceramic anilox roll with micro-metric adjustment
  1. Reversed single doctor blade
  1. Anilox roll and printing cylinder separation and reunion pneumatically
  2. self-cleaning plate feature.The anilox and plate cylinders release alternately, transfering residual ink to the paper when machine stop, leaving the printing plates clean and minimizing the need of hand to clean the plates
  3. When press stops, the anilox roll continuous running. Hence avoiding permanent damage, which is caused by ink drying on the anilox surface

5. Drying Units

  1. Every printing unit has one separate drying unit
  1. High efficiency drying unit including infra red lamps, air blowing/suction system. Air intake adjustable, Air circulation design on the exhaust, the blower is adjustable
  2. Short wave infrared heating elements
  3. Natural air blowing assembly with exhaust fan

6. Video Web Inspection System

  1. Video is high efficiency and synchronous, can be moved left and right
  2. With 14 inch monitor one pc
  3. one stroboscope lamp
  4. It can be enlarged 18 times of image

7.Out Feed Tension Control System

  1. The rear tension unit is made of alloy and cast iron
  2. Use the double side pressure rubber to clutch and feed and to guarantee the stale tension

8.Rewinding Unit

  1. rewind unit 60”(1524mm)capacity, with 3” shaft
  1. Hydraulic roll lift
  2. Web break sensor, automatically shut down when paper broken.

9. CZPT matic Lubricating System

  1. The gear’s automatic dampening system can adjust the lubricating time and ration
  2. When the dampening system breaks down or the lubrication is not enough, the indicator will alarm automatically.

Technical Parameters:

Specification 650 920 1571 1220 1320
Max. Web Width 650mm 920mm 1571mm 1220mm 1320mm
Max. CZPT Width 600mm 900mm 1000mm 1200mm 1300mm
Max Die-Cutting Width 600mm 900mm 1000mm 1200mm 1300mm
Printing Repeat 286-1200mm 286-1200mm 286-1200mm 286-1200mm 286-1200mm
Max.Unwinder Diameter 1524mm 1524mm 1524mm 1524mm  
Max.Rewinder Diameter 1524mm 1524mm 1524mm 1524mm 1524mm
Gearing 1/8cp 1/8cp 1/8cp 1/8cp 1/8cp
Max CZPT CZPT 150m/min 150m/min 150m/min 150m/min 150m/min
Diameter of web roller 100mm 100mm 100mm 100mm 100mm
Drying mode Warm Drying/IR Drying/ UV Drying
Oil used Aqueous ink/ UV Ink
Power Requirement 380V 3PH 50Hz
Substrate 17g copy paper, cotton paper, 80-450g chrome paper, aluminum-foil paper, BOPP, PET, paper board, kraft paper

 

Nanjing Beke Best Selling 100A Sheet Metal near me shop Plasm sales a Cutting Machine Made in China

Product Description

Beke CNC sheet metal Plasma Cutting CZPT

1 Main features

  1. The machine is desktop gantry structure with double-side drive. X & Y axes track are precise cylindrical linear guide rails, precise gear and rack drive, runs stably.
  2. Machine frame adopts the whole welding and annealing treatment, main frame is made by medium-sized steel pipe through welding; rail base plates are made through the planer precision processing, high strength, good precision and no deformation.
  3. Crossbeam, side panels and all movable parts are made by aluminum alloy through fine casing and milling, with features of high strength and small inertia, ensuring the high strength and avoiding the cutting positioning instability caused by high inertia.
  4. Adopting HP105 portable arc-pressure height regulator which can automatically regulates the height between cutter and plate to ensure the cutting quality. CZPT structure can effectively avoid collision between cutting head and steel plates owning to reaction rate cannot matches with that of cutting head.
  5. Specimen closed environmental bottom groove and dust treatment system timely discharge dust and provides a healthy working environment for workers.

2. Control system

1. Up to 45 commonly used graphics libraries

2. Graphics scaling, rotation, mirroring functions

3. Graphics matrix, interleaved, and repetitive

4. CZPT matically limit the speed in the corner according to the thickness of the steel plate, effectively prevent over-burning

5. Quickly convert between metric and imperial measurements .

6. Graphical steel plate calibration

7. Coordinate system is customizable

8. CZPT izable IO

9. Backup system and parameters, online upgrade

3. CZPT er visits

4. Company views 

5. Delivery 

6. More Products

Pre-service:
1:We will help you confirm the model of CZPT machine according to your offered sheet plate information.
2:You are very welcome to see CZPT machine how to work in the factory before you place an order with us.
Aftersales-service:
1:Free installation,trial start and adjustment,training.
2:We guarantee machine quality for 2 years.During this year,if spare parts of the machine were damaged,we can send the components to the CZPT er by DHL,TNT freely.
3:Our factory provide the secive for the CZPT er forever,if the CZPT er need operation help,we provide 24 hours on-line reply service.

Fine Quality near me shop EVA Foaming Hydraulic Cheap Press Machine

Product Description

Fine Quality EVA Foaming CZPT ulic Press CZPT

Machinesteel structure, main USES the plunger by cold hard surface hardness for HR – 70, the product has little pressure, temperature and reliable performance, open mold speed, etc. Used in such slippers, EVA foaming plastics shoes materials etc.

Features of eva foaming hydraulic press machine:
1)Adopts touch control type man-machine interface and PLC micro-computer system, monitor the whole machine in the whole course, failure alarm automatically, viewable digital, easy operation.
2)The shoot gun adopts gear, rack transmission; Line railway guide; CZPT speed electro rotary encoder and transducer control with rapid shift, accurate orientation, the repeat orientated precision ≤ 1.0mm.
3)It has super-high locked strength (≥ 1200KN), can unlock rapidly (≤ 0.5s), improve the quality of finished product.
4)It adopts P. I. D scale calculous temperature control module, the system temperature control precision ≤ ± 1oC
5)Shoot the material volume with hydraulic pressure control loop with pressure & flux double rate and electric metric ruler, the related temperature ≤ 1%.
6)It has pneumatic safe door setting and automatic feed instruction, safety and credible operation.

7)we also can according to the CZPT ers’ requirement, and design the CZPT -standard type of the foaming machine.

1). CZPT matic ascending, bumping, pressurization and descending operations.

2). CZPT speed ascending, pressure retaining for better product quality.

3). CZPT release valve for CZPT descending but incorporates adjustable speed.

4). Depressurization can be adjusted to suit thickness of products.

5). Special designed platens for even heating area.

6). The above features can be incorporated in automatic and semi-automatic machines

Automatic EV near me shop A Tyre Moulding Machine / Cost Bicycle EVA Tyre Making Machine

Product Description

 Bicycle EVA Tyre Making CZPT

Company Information

HangZhou CZPT CZPT & CZPT nology  Co.,ltd is a firm engaged in production enterprise, mechanism of rubber has more than 20 years of history.

Companies depend on the technical power, the strict scientific management expertise, product quality and good service, and won the majority of the customer’s trust. many of the product is exported to the united states, canada, australia and india, indonesia and uzbekistan, etc.

Company management certification: ISO 9001:2000, ISO 17799, ISO 9001:2008, ISO 14001:2004, ISO/TS 16949

Our main products are plate vulcanizing press, two-roll mixing mill, rubber extruder, banbury intensive kneader, bale cutter, conveyer belt vulcanizing press, tyre reclaiming machines, rubber refiner, rubber cracker, etc. we especially specialize in the design and manufacture of the nonstandard products .

Features:

1)Adopts touch control type man-machine interface and PLC micro-computer system, monitor the whole machine in the whole course, failure alarm automatically, viewable digital, easy operation. 
2)The shoot gun adopts gear, rack transmission; line railway guide; high speed electro rotary encoder and transducer control with rapid shift, accurate orientation, the repeat orientated precision ≤1.0mm.    
3)It has super-high locked strength (≥1200KN), can unlock rapidly (≤0.5s), improve the quality of finished product. 
4)It adopts P.I.D scale calculous temperature control module, the system temperature control precision ≤±1oC  
5)Shoot the material volume with hydraulic pressure control loop with pressure & flux double rate and electric metric ruler, the related temperature ≤1%. 
6)It has pneumatic safe door setting and automatic feed instruction, safety and credible operation.  

 

Main specifications:

Model 

 

SL-030

Mould closing force 

 

1200KN

Height of the mould mounting 

 

120-200mm

No. of work stations 

 

2,4,6,8,10 stations

Size of the mould plate (L×W×H) 

 

(290×480)mm×2

Mould opening stroke 

 

300mm

Output 

 

4500-5000pairs/24hr

Injection nozzle carriages 

 

2

Max. injection amount 

 

855g

Injection speed 

 

0-11cm/sec

No. of temperature control zones 

 

4 zones/section

Screw diameters 

 

φ60mm×2

Injection pressure 

 

95MPa

Screw speed 

 

0-165r.p.m

Power consumption of the hydraulic system 

 

70kw

Power consumption of the blower fan for cooling down the barrel 

 

0.84kw

Oil consumption 

 

900L

Hot plates for heating the mould 

 

89.6kw

Vacuum pumps 

 

2.24kw

Total CZPT consumption 

 

165kw/h

Net weight 

 

38000kg

    
EVA Wheel Forming CZPT :

Final eva wheel mold:

 
Final eva wheel:

If have any question ,welcome  contact me .